View previous topic :: View next topic |
Author |
Message |
skyking1231
Joined: 10 Jul 2000 Posts: 280
|
Posted: Tue Nov 12, 2013 6:14 pm Post subject: Slotbox inserts/plugs |
|
|
Anyone know where to get these in the US ? I found a few sites in the UK that have inserts.
Also...what size are slotbox screws ? |
|
Back to top |
|
|
U2U2U2
Joined: 06 Jul 2001 Posts: 5467 Location: Shipsterns Bluff, Tasmania. Colorado
|
Posted: Tue Nov 12, 2013 7:30 pm Post subject: |
|
|
I get my slotboxes from Matt Prichard, they come from Cobra/ TABOU, they cant be different than anyone else uses at Cobra.
matt@prichardwindsurfing.com
Matt had/has screws and boxes
Screws will depend on what the box is, Starboard had a grub screw similar to FCS for a start. The boxes I have use a self tapping screw with a Phillips head of sorts, with a cap. last were a dollar each, and from
http://kanahakai.com/ in Hawaii I have gotten screws from for COBRA slotboxes.
The USA importer for Starboard did not have any, NO. repeat NO dealer in the USA that I have checked with has any screws, odd beyond words.
( I have searched for the correct screw, and WTF, no one has this, probably something else would work, but the heads are weird)
janez@flikkaboards.com
AT FLIKKA boards can supply them. They have the trickiest boxes with brass inserts and internal head screws look to be very robust.
yes
FLIKKA d.o.o.
Hradeckega 35
1000 Ljubljana
Slovenija (EU)
depending on what you want them for other options for boxes are around. S/B are kinda a PITA to install. USBoxes are readily available, and dead easy to cut down to make shorter/less weight.
I have not seen any UK supplied boxes, but MOO Custom does make them, for sale or not...? _________________ K4 fins
4Boards....May the fours be with you
http://www.k4fins.com/fins.html
http://4boards.co.uk/ |
|
Back to top |
|
|
skyking1231
Joined: 10 Jul 2000 Posts: 280
|
Posted: Wed Nov 13, 2013 10:25 am Post subject: |
|
|
Thanks.
I don't need the screws yet. But i can see myself dropping one in the sand.
I might try and make inserts. Just need to find some plastic the same thickness as the box...then use my band saw to cut to shape. |
|
Back to top |
|
|
U2U2U2
Joined: 06 Jul 2001 Posts: 5467 Location: Shipsterns Bluff, Tasmania. Colorado
|
Posted: Wed Nov 13, 2013 10:52 am Post subject: |
|
|
I don't think they would be hard to make, but I would use Divinycell or Corecell as the outer layer , and then carbon layers.
the slotbox itself goes down about 6cm and is carbon, top sides and bottom.
the 2nd photo is the portion of the slotbox removed (on right) for installation.
FWIW the boxes in the photos weight:
in GRAMS
ProBox..49gr
US box.. 7 3/4" long..123gr
POWERBOX, 99 % intact..134gr
Soltbox..133gr
no shown but accurate weight MINI TUTTLE..96gr
USBox with divinycell epoxied for support..152gr
(epoxy is heavy stuff)
the installation process/materials , for me include pour foam, carbon & fiberglass sheet, so in theory the same for any box. Some would definately be better for side bites close to the rail, others for strength better for twin or large quad fins.
What I don't do is remove the slot box screws, only loosen enough to remove the fin, in my mind this area has been the weak link , the screws thru the box itself, so I leave in the threads that were created.
The screws also come/came in 2 different lengths, while the same otherwise, all the newer ones I have seen are longer. Part of the problem with the screw , finding a replacement, is the head wants to sit inside the slightly countersunk hole, to not poke out, its a unique head therefore. _________________ K4 fins
4Boards....May the fours be with you
http://www.k4fins.com/fins.html
http://4boards.co.uk/ |
|
Back to top |
|
|
skyking1231
Joined: 10 Jul 2000 Posts: 280
|
Posted: Wed Nov 13, 2013 2:18 pm Post subject: |
|
|
Very cool. Was curious what the slot box looked like. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You can attach files in this forum You can download files in this forum
|
|
|