View previous topic :: View next topic |
Author |
Message |
isobars
Joined: 12 Dec 1999 Posts: 20935
|
Posted: Mon May 12, 2014 10:09 am Post subject: |
|
|
With OEM (came with the vehicle) roof racks, the weakest link is the cheap widget that connects the rack to the roof. For loads taller and higher drag than one board nestled beneath and behind the slipstream, I've always drilled into the roof and bolted the front of the rack to steel subframe (or at least huge fender washers that cannot pull through the sheet metal) with actual ... you know ... BOLTS.
Overkill? Hell, yes! Considering the damage flying gear can do to your gear, other vehicles, their occupants, and your legal expenses, overkill is the only way to go. I enjoy the peace of mind I get from KNOWING that those 100+ mph relative windspeed gusts can NOT tear my stuff off my roof. A bud's
Nissan XTerra woof wacks took a big flying leaf across the highway when its OEM fasteners pulled out, and I've seen those chintzy pieces of metal -- little more than threaded pop rivets -- up close. A WS board buffeted by wind can greatly exceed the load ratings of OEM roof racks. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You can attach files in this forum You can download files in this forum
|
|
|