View previous topic :: View next topic |
Author |
Message |
RaceboardDude
Joined: 08 Dec 2010 Posts: 86
|
Posted: Sat Feb 24, 2018 8:02 pm Post subject: |
|
|
I've got both a F2 Lightning mast track and a Fanatic Mega Cat mast track to sell. Both are the notch-type you prefer over the Mistral track. Similiar length but slightly wider than Mistral so will require board modification. Paypal and shipping from NC if interested. Starboard and Exocet tracks (both same Cobra) have been listed as available parts by their distributors in the past but US customer service reponse now for either brand is almost non-existent. |
|
Back to top |
|
|
grantmac017
Joined: 04 Aug 2016 Posts: 946
|
Posted: Sat Feb 24, 2018 8:24 pm Post subject: |
|
|
Some photo measurements show the Cobra ones are quite a bit too wide and carving up the board isn't something I want to do.
But perhaps DIY is the path forward. |
|
Back to top |
|
|
RaceboardDude
Joined: 08 Dec 2010 Posts: 86
|
Posted: Sat Feb 24, 2018 10:10 pm Post subject: |
|
|
I've got a bunch of Mistral mast track parts and have rebuilt many over the years. Let me know if you need parts. If yours is busted and you care to ship to me, I'll either rebuild it or sell you a good one on exchange. Have cannibalized a few trashed Mistral One Design's (MOD/IMCO) for the common parts shared with Equipe I. Mast track is same as Equipe II as well. WindPower in WI has also reproduced a few Mistral track parts on their own too. I've got a Starboard Phantom 380 with the long Cobra track and it will not easily retrofit to a Mistral Equipe I/II but let me know if you need the measurements. RS:X track (Cobra) is same components and extrusion but too short to be a practical retrofit for a old-school raceboard. |
|
Back to top |
|
|
rtz
Joined: 31 Oct 2010 Posts: 296 Location: Oklahoma City
|
|
Back to top |
|
|
grantmac017
Joined: 04 Aug 2016 Posts: 946
|
Posted: Sun Feb 25, 2018 11:40 am Post subject: |
|
|
RaceboardDude wrote: | I've got a bunch of Mistral mast track parts and have rebuilt many over the years. Let me know if you need parts. If yours is busted and you care to ship to me, I'll either rebuild it or sell you a good one on exchange. Have cannibalized a few trashed Mistral One Design's (MOD/IMCO) for the common parts shared with Equipe I. Mast track is same as Equipe II as well. WindPower in WI has also reproduced a few Mistral track parts on their own too. I've got a Starboard Phantom 380 with the long Cobra track and it will not easily retrofit to a Mistral Equipe I/II but let me know if you need the measurements. RS:X track (Cobra) is same components and extrusion but too short to be a practical retrofit for a old-school raceboard. |
PM inbound. |
|
Back to top |
|
|
RaceboardDude
Joined: 08 Dec 2010 Posts: 86
|
Posted: Sun Feb 25, 2018 1:21 pm Post subject: |
|
|
Roger that. Check your Message Center. Take it from there. |
|
Back to top |
|
|
|