View previous topic :: View next topic |
Author |
Message |
mamero
Joined: 25 Aug 2013 Posts: 380 Location: Vancouver, Canada
|
Posted: Tue Apr 03, 2018 5:57 pm Post subject: |
|
|
grantmac017 wrote: | Downhaul line is pretty stiff so it'll be draggy. 3mm spectra would be better. |
What do you mean by stiff and draggy? |
|
Back to top |
|
|
cgoudie1
Joined: 10 Apr 2006 Posts: 2599 Location: Killer Sturgeon Cove
|
Posted: Tue Apr 03, 2018 6:00 pm Post subject: |
|
|
He means high friction. Maybe not the best choice for AO.
-Craig
mamero wrote: | grantmac017 wrote: | Downhaul line is pretty stiff so it'll be draggy. 3mm spectra would be better. |
What do you mean by stiff and draggy? |
|
|
Back to top |
|
|
mamero
Joined: 25 Aug 2013 Posts: 380 Location: Vancouver, Canada
|
Posted: Tue Apr 03, 2018 6:03 pm Post subject: |
|
|
cgoudie1 wrote: | He means high friction. Maybe not the best choice for AO.
-Craig
mamero wrote: | grantmac017 wrote: | Downhaul line is pretty stiff so it'll be draggy. 3mm spectra would be better. |
What do you mean by stiff and draggy? |
|
Ah that makes sense. I use Formuline for downhaul which is nice and smooth. That stuff would be good for an Adjustbale Outhaul? |
|
Back to top |
|
|
mamero
Joined: 25 Aug 2013 Posts: 380 Location: Vancouver, Canada
|
Posted: Tue Apr 03, 2018 6:10 pm Post subject: |
|
|
It seems in the Kiting world they are replacing the regular Bridal Pulleys with these new sheaveless pulleys; a pulleyless pulley!
This look pretty slick. They are supper small, lightweight, and strong. This would make an excellent substitute for the pulleys that are normally used in adjustable outhauls.
https://www.ronstan.com/marine/range.asp?RnID=423
If I bought two sheaveless pulleys, two cam buckles, and a good length of Formaline I think it would be easy to make a very smooth unobtrusive Adjustable Out Haul for probably half or 1/3 the price of a premade AO from Chinook or Sailworks.
PS my Chinook booms all have 3 pulleys at the clew so I am set there as well. |
|
Back to top |
|
|
bred2shred
Joined: 02 May 2000 Posts: 989 Location: Jersey Shore
|
Posted: Wed Apr 04, 2018 9:28 am Post subject: |
|
|
mamero wrote: | So changing sail sizes on the same boom is a PITA with and adjustable outhaul? |
Not a PITA if you have your gear sorted in advance.
With a double sided, traditional adjustable outhaul system, there are cleats with a 2:1 pulley and line (or webbings with cam buckles) attached to each side of the boom. Then there is a separate line that ties to the pulley on the side of the boom, gets threaded through the tail/clew pulleys, and then gets tied to the pulley on the opposite side of the boom. (And in my experience, you need a minimum 6:1 purchase to effectively adjust the outhaul under way.)
When I used AO (for Formula racing) I made a specific line (the one that gets routed through the tail/clew pulleys) for each sail. That line was cut to the correct length needed for that particular sail, was only used with that sail, and always stayed with that sail.
So regardless of what sail was being rigged on a particular boom, the rigging process was always the same, there was never any adjusment needed to the system, and the line lengths were always perfect.
Another item of note. If your sail requires a lot of outhaul tension during the rigging process (for example if your sail rigs by installing the mast, threading the downhaul, installing the boom and outhauling to max, then popping on cams and finally dowhnauling) it will probably be very difficult to rig the AO and pull on the tension needed. Instead, first rig your outhaul using the traditional method using a single line and the cleat on the tail of the boom. After the sail is fully rigged, remove that "temporary" outhaul line and install the AO. This might seem like a lot of work, but the rigging will go much more easily and if your AO lines are pre-set as described above, you'll be looking at maybe one minute extra to rig the AO.
sm |
|
Back to top |
|
|
grantmac017
Joined: 04 Aug 2016 Posts: 946
|
Posted: Wed Apr 04, 2018 12:08 pm Post subject: |
|
|
No reason those blocks wouldn't work, most of the drag is in the tailpiece. Thinner line really helps. |
|
Back to top |
|
|
kmf
Joined: 02 Apr 2001 Posts: 503
|
Posted: Wed Apr 04, 2018 2:21 pm Post subject: |
|
|
A single sided AO is easy to set up and once it is set up, one rigs any sail that fits on that particular boom just like you normally would. I use one all of the time for all of my sails, 3.4 to 6.5 meter and find it handy to use and it improves the range of all of my sails.
I also own a two sided Sailworks AO, but for recreational sailing I find it more of a hassle than it is worth, so on my 5.5 and 6.5 Retro's I just use the single sided one and find that sufficient for my needs....I am not racing anyone, but the AO makes it really nice to fine tune the sail in real time...while sailing ....although it takes a bit of practice to adjust it on the fly. It is easy to adjust the outhaul by dropping in the water and adjusting it, or easier yet by going to shore and giving the AO a yank for a tighter sail, or letting a bit of OHaul out for more power. And it just takes a few seconds to do.
KMF |
|
Back to top |
|
|
wsmtbskate
Joined: 09 Jun 2010 Posts: 124
|
Posted: Sun Apr 08, 2018 6:41 pm Post subject: |
|
|
I use the sail works AO on my rigs as well, but only one sided.
I use the Chinook Double Sail pulley for the clew.
Set up is just as easy, if not easier than "regular" outhaul set up.
It nice when overpowered to be able to give the AO a yank and tighten up the outhaul. Although I'm a fan of chinook, I definitely prefer the sail works to the Chinook AO system. The big block/cleat on the Chinook gets in the way. |
|
Back to top |
|
|
DanWeiss
Joined: 24 Jun 2008 Posts: 2296 Location: Connecticut, USA
|
Posted: Mon Apr 09, 2018 1:22 pm Post subject: |
|
|
I love the double-side Sailworks AO that I use for Kona One sailing. For the single-side, just route the long end through the boom pulley, through the clew grommet and directly into the boom end cleat. That's 6:1 and plenty of leverage for most recreational sails and requires no extra steps to rig; just thread the line from the clew pulley, through the grommet and back to the cleat. I use the braided spectra included in the kit. The stuff is very slippery yet very low stretch. It should cleat fine if the cleat's teeth are sharp. _________________ Support Your Sport. Join US Windsurfing!
www.USWindsurfing.org |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You can attach files in this forum You can download files in this forum
|
|
|