View previous topic :: View next topic |
Author |
Message |
boardsurfr
Joined: 23 Aug 2001 Posts: 1266
|
Posted: Sun Jul 22, 2018 7:04 am Post subject: |
|
|
atlas.wave55 wrote: | Has anyone tryed foiling with a formula board? Seems like a good fit considering this board is wide short and light. |
I've seen one formula sailor go out for the first time with a beginner foil on his formula board. He got some decent rides right away, with runs of maybe 200 feet within the first half hour. No bad crashes, either. |
|
Back to top |
|
|
atlas.wave55
Joined: 24 Aug 2016 Posts: 111
|
Posted: Sun Jul 22, 2018 8:56 am Post subject: |
|
|
Do you reinforce the fin boxes on the fotmula boards or are they already strong enough?
Have heard of deep tuddle boxes cracking, but seems to be rare.they say, if God forbid it happens you can get it reinforced then.
The videos on foiling look really fun minus the first time crashes. When I get one I will probably put some protection on the lower mast.
Do you need more inboard straps in the front too or just the back. Could the chicken strap work?
Seems that foiling is the new trend theses days. And they keep on getting a bit more affordable for the average joe windsurfing. |
|
Back to top |
|
|
dllee
Joined: 03 Jul 2009 Posts: 5329 Location: East Bay
|
Posted: Sun Jul 22, 2018 11:39 am Post subject: |
|
|
Reinforce finbox? What do you think when you go from a 70 cm fin to a 90+ mast on your foil?
Strap move? You can always go strapless, you can adapt to wrong settings, or you can move the fronts a mere 2" inboard for full foot contact and rears around 3" for the same reason.
Wide boards work best with wide, hi aspect front wings, but if you ride kitefoils, you only need to position yourself more inboard and the mast more forward. |
|
Back to top |
|
|
atlas.wave55
Joined: 24 Aug 2016 Posts: 111
|
Posted: Mon Jul 23, 2018 4:23 pm Post subject: |
|
|
Perchased the rs:one foil today. Screws seem pritty short at 45mm long considering i us 70 OR 90mm long ones my formula fin and foil screw threads are a lot different, imperial?. The mast foil has a continuous thread compared to a barrel nut. Plan on using it with a formula board. Can not test it out until the weekend. Hope the screws are long enough! Hate to think they would sell you too small of a screw for your board considering the amount you pay.
Has anyone had this problem before? |
|
Back to top |
|
|
atlas.wave55
Joined: 24 Aug 2016 Posts: 111
|
Posted: Tue Jul 24, 2018 2:37 pm Post subject: |
|
|
Found this link showing screw sizes for my board sb formula 162 2008.
http://www.star-board-windsurfing.com/2018/fin-bolt-charts/
Seems I need a M6 85mm and a M6 100 mm screws. The ones I have are 90s I think but metric threading. The ones that comes with the fin are imperial 1/4-20 I think? |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You can attach files in this forum You can download files in this forum
|
|
|