View previous topic :: View next topic |
Author |
Message |
DanWeiss
Joined: 24 Jun 2008 Posts: 2296 Location: Connecticut, USA
|
Posted: Mon May 21, 2012 8:38 pm Post subject: |
|
|
techno900 wrote: | I will offer a response. In my line of work were I had oversight of 6 different phases of renovations on a 1980's office building being converted into a school, I ran into many frustrating and costly road blocks from:
ADA requirements
Asbestos abatement
Elevator inspections
Fire codes & inspections
While there is a great need for regulations for all of these areas, many of them go well beyond common sense and logic and all end up being very costly. I don't wish to go into detail simply because it would be exhausting.
On the other side of the issue is where electrical codes required very specific gage wire for some some particular installations, the codes weren't followed buy the electricians to save money (also missed by the general contractor and the city inspectors), plus we almost had several fires due to melting and shorting wires. The point is that wanting and needing regulations doesn't mean that they will be followed or inspected. It's just the irony of the situation. It's possible to get screwed on both sides of the issue. |
I'm sure there are more than a few details in ADA compliance that cause headaches. One regarding port-a-potties comes to mind, whether any distance in elevation of the floor surface above the ground is something other than the meaning "flush with the ground." I battled this out with a building inspector who insisted that each unit be sunk into the dirt to the top of the plastic floor was flush with the earth. I told him to write that out in a cease and desist if he wanted me to countersink a fully-compliant unit in order to meet his interpretation. He didn't. But he was and continues to be a total idiot. _________________ Support Your Sport. Join US Windsurfing!
www.USWindsurfing.org |
|
Back to top |
|
|
mac
Joined: 07 Mar 1999 Posts: 17749 Location: Berkeley, California
|
Posted: Tue May 22, 2012 12:52 am Post subject: |
|
|
Still silence from silly Bard. Caught making it up--again. |
|
Back to top |
|
|
pueno
Joined: 03 Mar 2007 Posts: 2807
|
Posted: Tue May 22, 2012 4:46 am Post subject: |
|
|
techno900 wrote: | I will offer a response. In my line of work were I had oversight of 6 different phases of renovations on a 1980's office building being converted into a school, I ran into many frustrating and costly road blocks from:
ADA requirements
Asbestos abatement
Elevator inspections
Fire codes & inspections
While there is a great need for regulations for all of these areas, many of them go well beyond common sense and logic and all end up being very costly. I don't wish to go into detail simply because it would be exhausting.
On the other side of the issue is where electrical codes required very specific gage wire for some some particular installations, the codes weren't followed buy the electricians to save money (also missed by the general contractor and the city inspectors), plus we almost had several fires due to melting and shorting wires. The point is that wanting and needing regulations doesn't mean that they will be followed or inspected. It's just the irony of the situation. It's possible to get screwed on both sides of the issue. |
Those regulations, and many more like them, are there specifically to protect the trusting public both from unscrupulous workmanship and from incompetent workmanship.
And, as you well know (or damned well SHOULD know), those exist in abundance in the building and construction trades.
And, yes, sadly, a few of those inspectors (who miss the undersized wiring) are themselves former tradesmen who are just as incompetent or crooked on one side of the table as on the other side.
It sometimes happens. But 99% of the time, it happens the right way -- and that's much better than 0% of the time.
===============
On a different topic, here's a quick take on federal spending under Obama. It's worth a peek.
I don't think the article's title is accurate -- it should address the rate of change, not the absolute amount.
. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
|
|
|