View previous topic :: View next topic |
Author |
Message |
U2U2U2
Joined: 06 Jul 2001 Posts: 5467 Location: Shipsterns Bluff, Tasmania. Colorado
|
|
Back to top |
|
|
scargo
Joined: 19 May 2007 Posts: 394
|
Posted: Wed May 01, 2013 11:44 am Post subject: |
|
|
I agree, your previous two sails were way too close in size. With your two boards, I'd be thinking 5.5, 7.0 & 8.5 And I feel the smartest approach is to get all of the same make & line, e.g., all Retros. That way the feel, tuning, etc., is consistent from one sail to the next so you can transition smoothly.
Don't fall into the trap of trying to get everything to fit on one mast: for one thing, that generally requires you to use too much extension (or too much headcap), but I also find I like to keep two sails rigged at once, so you can switch back and forth without losing valuable sailing time.
Second, invest in an adjustable outhaul -- it allows you to always set your downhaul in essentially the same place and then feather the power up & down as needed.
In other words, spending a little more on masts and an OA ensures that you get everything you can out of your quiver. |
|
Back to top |
|
|
Jim.od3
Joined: 25 Aug 2012 Posts: 90
|
Posted: Wed May 01, 2013 12:00 pm Post subject: |
|
|
I live in Oregon, but we vacation at Lake Michigan every summer to visit family. I've sailed between South Haven and Saugatuck a few times over the years, but not since I moved to Oregon. Last summer I bought a 103L Mistral Screamer (old school narrow design) and a quiver and took it to Michigan to have on hand in case there's ever a good windy day. Wouldn't want to miss it! Lake Michigan is a lot of fun on a good day!
I have sails from 4.7 up to 6.7 that rig fine on the 460cm mast. If I were really serious about getting sailing time on Lake Michigan I think I would add the biggest sail I could possibly fit on my 460cm mast with 40cm extension. That would probably be 7.5-8.0. And I would get another board in the 115-135L range for the big sail.
But I am cheap, and most of my sailing fix comes from the gorge which is so much more reliable. So I will be content with having a decent moderate wind kit stashed away in Michigan in case I get lucky one of these years.
You might consider a trip to the gorge to get some great sailing and cheap used gear. Time your trip to hit one of the many swap meets and you'll have a good chance at picking up good stuff for a good price. |
|
Back to top |
|
|
Jim.od3
Joined: 25 Aug 2012 Posts: 90
|
Posted: Wed May 01, 2013 12:10 pm Post subject: |
|
|
While scargo is right that having multiple masts and booms matched to the sails is ideal, I personally have not experienced much trouble rigging a smaller sail on a larger than ideal mast or vice-versa (within reason). Maybe I am not refined enough of a sailor to notice small performance differences. If money is not a concern and you really want the best possible setup, get the "full monte". I get along just fine with my relatively inexpensive, but less than ideal setup.
-Jim |
|
Back to top |
|
|
brianboonstra
Joined: 17 Aug 2009 Posts: 7
|
Posted: Fri May 03, 2013 9:01 am Post subject: |
|
|
Excellent advice here, thanks to everybody! I'm particularly glad to hear that the wider ranges in modern sails mean I can broaden the range of my purchases.
Folks were asking what I weigh, the answer is 177 pounds, 6'1" (80 kilos, 186cm). I assume people asked for the same reasons weight appears in the sail calculator (which I am now checking out)?
I was always planning to buy 2 masts/booms, one each for Holland and Chicago. If I go for 3 sails I'll keep the big one in Holland for the 160L (where I can't cherry-pick the wind) and the small one for the 118L in Chicago (where I can). A medium size sail can get carted around without annoying my wife.
Without compromising too much, it seems possible to get masts compatible with small medium and medium/large sails respectively. |
|
Back to top |
|
|
coachg
Joined: 10 Sep 2000 Posts: 3549
|
Posted: Fri May 03, 2013 9:17 am Post subject: |
|
|
Don't forget about fins. A less expensive way to extend the range of your sail is to get larger or smaller fins.
Coachg |
|
Back to top |
|
|
isobars
Joined: 12 Dec 1999 Posts: 20935
|
Posted: Fri May 03, 2013 10:07 am Post subject: |
|
|
brianboonstra wrote: | I'm particularly glad to hear that the wider ranges in modern sails mean I can broaden the range of my purchases. |
Even 20 years ago, I had no problem going back and forth between my two-cam 6.8 and my camless 5.2; my 5.7 was wasted. Today, I THOROUGHLY enjoy my 6.2 until it's time for my 4.7, all camless. If my only objective was speed, I'd stay on the 6.2 even longer, but for me WSing is all about maneuvering with lots of power, so my gap is narrower than what is necessary for straight line sailing. You might thus consider picking your sail sizes based on the range of winds you expect and learning to bridge the gap with skills and fins. With that approach a 1.5 sq m to even 2 m gap is reasonable in that size range.
Mike \m/ |
|
Back to top |
|
|
adywind
Joined: 08 Jan 2012 Posts: 665
|
Posted: Fri May 03, 2013 10:52 am Post subject: |
|
|
Hey Brian, there is no 2010 Exocet Cross 118lt . Yours is probably an older model. If by a chance it's the 2008 model you might have gotten yourself a perfect medium wind board for Lake Michigan. Why? Check this detailed test:
http://www.boardseekermag.com/windsurfing-equipment-tests/exocet-cross-118-2008.html
Believe me, you don't want too much speed on the Big Lake, you want controll. You'll find recommendations in this test about sail sizes , fins, foot straps for this board and from what I've read a 7.5 and a 6.0 no-cam freeride sails combination and 36 and 40cm fins will work fantastic and cover a 15-25 mph winds easily.
I would get rid of the BIC Techno 160 if I were you. I had this board as a transition between the beginner tankers and short boards. It's heavy and slow and gets out of control easily. There are awesome early planing boards out there if you are interested.
For wave riding on the other hand you'll need something smaller like 90ish lt FSW for example and smaller sails for high winds, or as often happens on Lake Michigan when there are waves but no wind - a WindSUP.
I can't comment on your long board.
For more tips you can ask us on: http://www.windsurfillinois.com/ |
|
Back to top |
|
|
jingebritsen
Joined: 21 Aug 2002 Posts: 3371
|
Posted: Fri May 03, 2013 7:26 pm Post subject: |
|
|
cheers coachg. i just managed to sail super lit on a 4.0 sail and the exocet X-Wave 111 by using the stock 26 cm fin with no thrusters. typically, i'd think of using my 111 with a 7.5 to 5.8 with a 32 cm fin. circumstances allowed me to take along my one board minimalist kit while working today. _________________ www.aerotechsails.com
www.exocet-original.com
www.iwindsurf.com
http://www.epicgearusa.com/ |
|
Back to top |
|
|
jingebritsen
Joined: 21 Aug 2002 Posts: 3371
|
Posted: Fri May 03, 2013 7:31 pm Post subject: |
|
|
adywind, i take exception to the "too much speed for control," comment. it takes trials and persistence to get "control thru speed," if one applies oneself with diligence. seen far too many sheet out way too much too often thinking they can obtain control by bleeding speed. makes the MFP leverage untenable if one sheets out too much. _________________ www.aerotechsails.com
www.exocet-original.com
www.iwindsurf.com
http://www.epicgearusa.com/ |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You can attach files in this forum You can download files in this forum
|
|
|