View previous topic :: View next topic |
Author |
Message |
nswestman
Joined: 29 Apr 2014 Posts: 3
|
Posted: Tue Apr 29, 2014 7:41 pm Post subject: Fanatic 295 mast foot |
|
|
Hi all,
I just bought a used Fanatic 295 with mast, sail and boom. It's practically unused. It has no mast foot and, so, I'll need to buy one. My old Mistral had two positions for the mast/two holes in which to secure the mast foot. I've used one board since that had the track system (I know I'm using uniformed or antiquated language, it has been a long time since I windsurfed). My question is, what do I need to know before I buy a mast foot? I know it needs to fit the mast, but what else do I need to know? Any information is appreciated. Thanks very much!
|
|
Back to top |
|
|
Sailboarder
Joined: 10 Apr 2011 Posts: 656
|
Posted: Tue Apr 29, 2014 7:47 pm Post subject: |
|
|
Easier to help you if you provide pictures. But then maybe someone knows that specific board and setup.
About the mast, is it one piece or 2 piece?
|
|
Back to top |
|
|
nswestman
Joined: 29 Apr 2014 Posts: 3
|
Posted: Tue Apr 29, 2014 8:12 pm Post subject: pictures |
|
|
Sailboarder,
I'll take some pictures tomorrow. What I noticed from the track is that the rear part of it is the entry for the foot. It looks like a rectangular opening at the rear of the track.
The mast is a two piece. Sorry this isn't very descriptive. The equipment is outside getting rinsed off in the rain for now. I'll post tomorrow.
Thank you for your reply.
Description: |
This is the picture from the craigslist ad. Maybe not enough detail. |
|
Filesize: |
50.64 KB |
Viewed: |
20655 Time(s) |
|
|
|
Back to top |
|
|
d0uglass
Joined: 28 May 2004 Posts: 1286 Location: Bonita Springs, Florida
|
Posted: Tue Apr 29, 2014 8:47 pm Post subject: |
|
|
That fanatic is 20+ years old, but at least it has the standard, modern kind of mast attachment track. It goes with a universal joint that looks like this:
http://i.ebayimg.com/00/s/OTYwWDcyMA==/z/AiQAAOxyTMdTLJ30/$_35.JPG
The nut fits into the opening at the end of the track, then you slide the base forward to the position you want, then twist the base around and around to screw it down until it's tight.
The "two holes" mast attachment you are describing sounds like the kind that the old "Mistral Superlight" had. The Mistral Superlight was a much bigger board than this fanatic, and it had a daggerboard. If that's the only board you've ever ridden, you will probably find that this fanatic is way too small and unstable to ride, in which case you should look for a big board with a daggerboard more similar to your old Mistral Superlight.
_________________ James' Blog: Windsurfing Equipment Size Calculator
http://jimbodouglass.blogspot.com/2010/11/updated-windsurf-calculator-online.html |
|
Back to top |
|
|
Arrgh
Joined: 05 May 1998 Posts: 864 Location: Rio
|
Posted: Tue Apr 29, 2014 9:12 pm Post subject: |
|
|
I had one one of those. It had an extra wide single rear strap, which might account for the "splayed" look of yours. Those two straps in the very rear need to be moved to the forward-most front foot position. That's a very easy first short board.
|
|
Back to top |
|
|
swchandler
Joined: 08 Nov 1993 Posts: 10588
|
|
Back to top |
|
|
joethewindsufa
Joined: 10 Oct 2010 Posts: 1190 Location: Montréal
|
Posted: Wed Apr 30, 2014 5:39 am Post subject: |
|
|
nswestman
means you are north, south, west ?
if we knew where you are, perhaps we could suggest shop(s) and/or used in the area
looks like you need the mast base and matching extension based on your foto
welcome back, be patient and do not get discouraged
just have FUN on the water !!! {and be safe}
you don't need the latest n greatest for that
|
|
Back to top |
|
|
PeconicPuffin
Joined: 07 Jun 2004 Posts: 1830
|
Posted: Wed Apr 30, 2014 6:22 am Post subject: |
|
|
Per Joe, it would be great if you could be referred to a local shop. There's a slight chance that your mast base extension may be off standard. Some of the old Windsurfing Hawaii extensions accepted some mast foot cups while rejecting others, and if you can sort that out in the store it would be best. So if you go to a shop bring the extension. Have fun!
_________________ Michael
http://www.peconicpuffin.com |
|
Back to top |
|
|
Sailboarder
Joined: 10 Apr 2011 Posts: 656
|
Posted: Wed Apr 30, 2014 8:42 am Post subject: |
|
|
To summarize,
you allready have an mast extension, the gold part. It may not be standard so you should bring it to your local shop to try the fit with the:
1-bolt mast base, US cup standard you need.
The hinge itself can be of 3 types. I prefer tendon because it's easier to inspect. Hourglass and mechanical also have their advantages leading to endless debates. Don't sweat that choice...
Before heading to the shop, you can rig your sail and make sure you can rig it with the parts you have, and also that the ropes are not frayed. Change them if required.
If not sure how to rig your sail, search for a rigging video. There's a Kona one available that's quite complete. The exact final tuning of the sail is quite maker and model dependant however.
Have fun!
|
|
Back to top |
|
|
ramps
Joined: 07 May 2000 Posts: 94
|
Posted: Wed Apr 30, 2014 10:34 am Post subject: |
|
|
Wow, I have one of those old Fanatics - it's strapped to the joists in my garage and I use it as a plank to store other windsurfing equipment. The mast foot I have is a true universal joint, that is like a car's driveshaft universal. It has a single brass nut that fits in the mast track and you turn the mast foot to tighten. It has been modified with Chinook parts so that it will work with their mast bases - if I remember I'll take a picture and post it. Fun learning board, but the deck is super slippery - I even used a redeck kit with not much improvement. Have fun!
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You can attach files in this forum You can download files in this forum
|
|
|