View previous topic :: View next topic |
Author |
Message |
hlasney
Joined: 05 Oct 2014 Posts: 9
|
Posted: Sun Oct 05, 2014 2:29 pm Post subject: Help with Mast? |
|
|
Hi, I Just aquired a free 1989 Mistral Pandera. Has 2 sails...Neilpryde 5.4 and a Gaastra racefoil pro 7.0. I have the mast extension (mistral ATS) but no mast came with it. Anyone know where i can get one? Standard size mast??..I'm new to windsurfing. Thanks for any direction.
|
|
Back to top |
|
|
justall
Joined: 30 Jul 2007 Posts: 442
|
Posted: Sun Oct 05, 2014 6:00 pm Post subject: |
|
|
First of all ... Welcome to windsurfing! To get you an answer, many sails have the mast length (generally in centimeters, cm) imprinted on the sail itself. Would you unroll them, have a look, and then post what you see (either in words or picture). Then, this forum will surely get you answers.
|
|
Back to top |
|
|
hlasney
Joined: 05 Oct 2014 Posts: 9
|
Posted: Sun Oct 05, 2014 8:58 pm Post subject: |
|
|
The Gaastra say 465cm, flex 27.5 - 30. The neilpride has no mast length on it...just stiffness 6.2 to 7.4. and boom length etc...no mast in CM. Should i assume you use only 1 mast for both sails? If so, i assume the bottom of the new mast i get would have the ability to slide over the mast extension (1" 7/ and lock into the various adjustment holes? Thanks.
Description: |
|
Filesize: |
832.8 KB |
Viewed: |
18703 Time(s) |
|
Description: |
|
Filesize: |
987.2 KB |
Viewed: |
18703 Time(s) |
|
|
|
Back to top |
|
|
hlasney
Joined: 05 Oct 2014 Posts: 9
|
Posted: Sun Oct 05, 2014 9:06 pm Post subject: |
|
|
this is the mast extension
Description: |
|
Filesize: |
1.16 MB |
Viewed: |
18696 Time(s) |
|
|
|
Back to top |
|
|
U2U2U2
Joined: 06 Jul 2001 Posts: 5467 Location: Shipsterns Bluff, Tasmania. Colorado
|
Posted: Mon Oct 06, 2014 9:36 am Post subject: |
|
|
your sail has the mast length written as LUFF length, its also written in meters not cm, both sails accept a 460cm length mast, small one with 15cm of mast extension, large with 25cm of extension.
I would considering the other components age :::purchase a used 460 cm length mast in SDM, standard diameter, ( NOT A RDM, reduced diameter mast)
used of 'any' brand that appears or is said to be in good condition
price not more than _____, a new 40% Carbon Chinook is $199, used for the mast your require 50--75
_________________ K4 fins
4Boards....May the fours be with you
http://www.k4fins.com/fins.html
http://4boards.co.uk/ |
|
Back to top |
|
|
cgoudie1
Joined: 10 Apr 2006 Posts: 2599 Location: Killer Sturgeon Cove
|
Posted: Mon Oct 06, 2014 11:30 am Post subject: |
|
|
Those sails, and that universal all look very old.
What U2U2U2 says is correct, but I would opt for an extension that would handle more than 25 cms, because those sails will undoubtedly have
stretched somewhat. Standard medium base extensions are around
28cm, that would put you near max extension. A large extension can typically run 48cm, which might be a little tto long inside the mast on the
small sail. If you can, you should try your sails with the extension you
plan to purchase, and see how they rig out.
-Craig
U2U2U2 wrote: | your sail has the mast length written as LUFF length, its also written in meters not cm, both sails accept a 460cm length mast, small one with 15cm of mast extension, large with 25cm of extension.
I would considering the other components age :::purchase a used 460 cm length mast in SDM, standard diameter, ( NOT A RDM, reduced diameter mast)
used of 'any' brand that appears or is said to be in good condition
price not more than _____, a new 40% Carbon Chinook is $199, used for the mast your require 50--75 |
|
|
Back to top |
|
|
spr81
Joined: 13 Jun 2001 Posts: 2
|
Posted: Mon Oct 06, 2014 5:09 pm Post subject: |
|
|
The original mast for that board was an Epoxy Flex top mast, one piece, blue in color. It is expensive to ship a one piece mast so you should get a more modern 2 pc. mast. The new masts will be constant Curve but should work ok on these old sails. and the constant curve mast is what you need if you buy any sails designed after 1993. If you are in the Chicago area, I have the original blue mast or the upgrade Aluminum mast for $75.
Ralph at Southport rigging
Kenosha, WI
262-652-5434
|
|
Back to top |
|
|
hlasney
Joined: 05 Oct 2014 Posts: 9
|
Posted: Mon Oct 06, 2014 6:26 pm Post subject: |
|
|
Great the for all your help..
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You can attach files in this forum You can download files in this forum
|
|
|